How to use an external microphone for SLR cameras? Many people who do news reporting have very high regulations for external microphones, neither the bottom noise is very large, but also need more intelligent systems, so what exactly is the SLR camera external microphone is better?

SLR camera external microphone: SLR camera external microphone, news coverage interview microphone, in fact, a large number of expectation microphone can reasonably reduce the relative low quality of the sound frequency power circuit noise caused by the camera:.

wired condenser microphone

1, hand-held condenser microphone: hand-held condenser microphone must first be installed DC power pool to the microphone power supply system, installed after the microphone yellow power switch to the microphone above the microphone can work in. Microphone and external sound card interface way is the first microphone cable XLR end and microphone tail end interconnected, the other end of the microphone cable coupling in the computer, external sound card, mixer, amplifier and other machinery and equipment microphone key in the jack can be applied. Connected to the mixer, amplifier and other machinery and equipment must have 3.5 to 6.35 conversion head can be.

2, small and medium-sized diaphragm and rectifier, vacuum solenoid valve condenser microphone: this type of microphone is called professional recording condenser microphone in the industry. Its operation is, the first microphone installed in front of the support frame on the shock-resistant shelf, followed by the male and female XLR cable end plugged in the bottom of the microphone jack, the other end connected to the phantom power or amplifier, mixer, phantom power XLR jack, and then the XLR to 3.5 microphone cable connected to the phantom power and external sound card. After the end, turn on the mixer or amplifier, phantom power supply power switch can be applied.

3, no switch power condenser microphone: this type of microphone is the recent one or two years of a new product condenser microphone, its characteristics are not phantom power and rechargeable battery power system can work in the installation and application is relatively simple. The way to start is to connect the XLR end of the microphone cable to the end of the microphone, the other end of the 3.5 power plug immediately plugged into the computer, external sound card, phantom power or mixer microphone key in the jack can be applied.

Posted by: arrowo at 08:01 AM | No Comments | Add Comment
Post contains 395 words, total size 3 kb.